product specification date:12/29/2005 no.60f00010 rev. cosmo electronics corporation photolink : KPLT1320BS sheet 1 of 4 3 fiber optic transmitting module for digital audio equipment features ttl interface. led is driven by differential circuit. a self-tapping hole for easy attachment to audio equipment panels. applications audio equipment. dvd player. automobile. outline dimensions (unit:mm) 9.50 2.40 2 31 10.00 8.00 19.50 2.54 2.54 6.00 2.00 2.20 3.80 10.70 0.50 2.35 4.00 4.60 4.60 2.40 2.10 3.60 1.40 11.20 9.50 12.20 pin connection 1.gnd 2.vcc 3.input tolerance: ? 0.2mm
roduct specification date:12/29/2005 no.60f00010 rev. cosmo electronics corporation photolink : KPLT1320BS sheet 2 of 4 3 1. maximum ratings ? ta=25
? parameter symbol rating unit storage temperature t stg -40~80
operating temperature t opr -20~70
power dissipation p max 120 mw supply voltage vcc -0.5~7 v input voltage v in -0.5~vcc+0.5 v soldering temperature t sol 260 ? note 1 ?
note 1 j soldering time 10 seconds ? at a distance of 1 mm from the package ? . 2. recommended operating conditions parameter symbol min typ. max unit supply voltage v cc 4.75 5.0 5.25 v high-level input voltage v ih 2.0 - vcc v low-level input voltage v il 0 - 0.8 v 3. electrical and optical characteristics ? ta=25
d v cc =5v ? parameter symbol condition min typ. max unit data rate nrz signal ? note 2 ? dc - 13.2 mb/s transmission distance using apf ? note 3 ? 0.2 - 5 m fiber output power ? note 4 ? pf -21 - -15 dbm peak emission wavelength p 630 650 690 nm current consumption icc - - 13 ma high level input voltage v ih 2.0 - - v low level input voltage v il - - 0.8 v low->high propagation delay time t plh 150 ns high -> low propagation delay time t phl 150 ns pulse width distortion ? tw 6mbps nrz signal -25 - 25 ns jitter time ? tj 25 ns note 2 j led is on when input signal is high, and off when it is low. the duty factor must be maintained between 25 to 75%. note 3 j all plastic fiber ? 970 / 1000nm ? . note 4 j measure with a standard optical fiber, peak value.
product specification date:12/29/2005 no.60f00010 rev. cosmo electronics corporation photolink : KPLT1320BS sheet 3 of 4 3 4. measuring method (1).measuring method of optical output coupling fiber to be measured vin gnd vcc photolink unit standard optical fiber cable optical power meter must be calibrated to have the wavelength sensitivity of 650nm | 0 dbm=1mw | optical power meter (2).measuring method of power dissipation current and input voltage vin vcc gnd icc vin vcc standard optical fiber cable optical power meter must be calibrated to have the wavelength sensitivity of 650nm | 0 dbm=1mw | optical power meter photolink unit to be measured (3).measuring method of pulse response 6mbps nrz"1010" successive pattern input signal to be measured input vin vcc gnd vcc photolink unit standard optical fiber cable ch2 output signal oscilloscope ch1 standard receiver 50% 50% phl plh output signal (ch2) input signal (ch1) output signal (ch2) input signal (ch1) voh vol tf tr 50% 90% 50% 10% t t ? tw= t - t phl plh
product specification date:12/29/2005 no.60f00010 rev. cosmo electronics corporation photolink : KPLT1320BS sheet 4 of 4 3 (4).measuring method of jitter vin vcc gnd vcc input 0 0 1 1 standard optical fiber cable ch2 ch1 oscilloscope output signal standard receiver photolink unit to be measured tj ? ? tj input signal (ch1) output signal (ch2) 50% 50% 5.recommended pcb layout 4.60 9.20 6.00 2.54 2.54 3.80 2.10 notes: 1.unit:mm 2.tolerance: ? 0.3mm
|
